Waterproof Ethernet Surge Protector PoE+ Gigabit - GDT Gas Discharge Tube - RJ45 Lightning Suppressor - LAN Network CAT5/CAT6 Thunder Arrestor - GbE 1000 Mbps - Weather/Water Resistant - Tupavco TP306

Weaterproof Ethernet Surge Protector is a surge protection device (SPD) that is inserted inline on an RJ45 CAT6/CAT5/CAT5e cable to prevent damage of electronic networking equipment.Outside use (water/water resistant)The thunder arrestor also offers secondary protection, which will arrest EMF induced surges (nearby lightning ethernet).Ethernet Surge Suppressor TP302 use a Gas Discharge Tube (GDT) on all 4 pairs (8 wires).Gigabit (GbE) 10/100/1000 Mbps data rate transfer supports an ultra-fast maximum data rate of 1 Gigabit per second.POE Surge Protector allows a single RJ-45 cable to provide both data connection and electric power to device.Mounting flange on the both sides of lightning suppressor allows easy mounting to a wall, network panel, cabinet, or rack attaching by screws (not included).The ethernet ground wire (11 Inch - 12 AWG) on the surge protector needs to be connected to ground through the shortest path.The lightning arrestor can be used with unshielded twisted pair (UTP) or shielded (STP) cables. The aluminum enclosure allows shielded current to be passed through the metal case of the network surge protector. Ethernet Surge Protector TP302 – LAN Network ESD Thunder Lightning Surge Arrester Gigabit PoE+ RJ45 CAT5 CAT5E CAT6 Suppressor Ethernet Surge Protector TP302 offers multiple stages protection Gas Discharge Tubes.Gigabit ethernet arrestor is capable of protecting a wide array of valuable technology products. Small, extremely well-built, provide deep protective measures for numerous devices. In the event of lightning strikes, or other elements that put your devices at risk, the surge arrestors goes to work immediately. LAN surge protector has a distinct reputation for ethernet lightning protection reliability. Ethernet Suppressor is easy to set up, and it is just as easy to use. These network surge protectors represent one of the most cost-effective solutions for protecting your devices and networks. Tupavco Waterproof Ethernet Surge Protector provides the high-level protection from power spikes and over-voltage for your PoE and non-PoE devices. Combination of 4 differential Gas Discharge Tubes and bi-directional Transient Voltage Suppressing (TVS) array, ensure instantaneous reaction to lightning strikes and wiring faults. When it comes to surge protection, it is important that instead of protecting only your power lines your data lines are protected too. There is always a possibility that electrical surges will find a way to your low-voltage cables such as Ethernet CAT5/5E, CAT6 RJ-45. Even though the level of the electric surges is not as high as in the power lines, it's enough to damage your equipment. Most of the other surge suppressors/protectors will continue to let the power through even their circuits are damaged but once Tupavco Network Weatherproof Surge Suppressor/Arrester is compromised to a surge strike, no power will be going past it. That way, your equipment will always stay safe. Ethernet Surge Protector does have a ground attachment on the enclosure itself, which makes TP306 a complete surge protection solution for your LAN, or a phone lines with RJ45 connectors. RJ-45 Cat6/Cat5/Cat/5e PoE Gigabit Networks