Inland Premium 1TB SSD 3D NAND M.2 2280 PCIe NVMe 3.0 x4 Internal Solid State Drive, Read/Write Speed up to 3100MB/s and 2800MB/s
Share Facebook Twitter Pinterest Email

Inland Premium 1TB SSD 3D NAND M.2 2280 PCIe NVMe 3.0 x4 Internal Solid State Drive, Read/Write Speed up to 3100MB/s and 2800MB/s

Brand: Inland
Product Code: HSM7443
Availability: In Stock
US$56.99
- +

About this product

*SSD Capacity 1TB. Form Factor: NVMe M.2 2280, Interface: PCIe 3.0 x4

*3D TLC NAND flash, resistant to shock, vibration, and movement. No overheat, No noise

*Sequential Read/Write Speed up to 3100MB/s and 2800MB/s respectively

*Endurance up to 1600 TBW. Random Read/Write 4K: up to 520,000 and 430,000 IOPS

*3 Year Limited Parts and Labor Warranty. Supported Windows OS: Microsoft Windows 8,10. Ideal for mainstream PCs, laptops and ultrabooks for personal, gaming and business use

Description

SUPPORT: INLAND PCIe Gen 3 x 4 NVMe M.2 (2280) SSD Get NVMe SSD speeds and inject new life into your laptop or desktop PC with Inland solid state drives. You will experience quicker boot-up and shutdown, quicker application response, and data transfer speeds much faster than with a typical hard disk drive - all without purchasing a new computer. Faster Read/Write speeds than your standard Sata SSD, and exponentially quicker than an HDD. Most SATA SSD provide Read/Write speeds in the neighborhood of 530/500 MB/s. Inland Premium NVMe drives provide read speeds up to 3100MB/s. That's almost 6x over SATA SSDs and as much as 30x over spinning HDDs! The most common m.2 2280 Form Factor supports the next-generation platforms of Intel and AMD. Suitable for the latest desktop, notebook and ultrabook. You do not need a thermal pad for this solid state drive and the motherboard, but need a M.2 NVME M Key compatible slot for this internal SSD. The built-in Advance Flash Management SMART, TRIM, Advance Wear-Leveling(AWL), Bad Block Management(BBM), Firmware Update and Over-Provision technology improve the accuracy of data transfer and prolong the service life of flash memory, and bring it to it's maximum performance. Shock Resistance: 1,500G, 0.5ms. Equipped with 3D TLC NAND Flash, power consumption is much lower than traditional hard drives, no overheat and quiet, larger storager capacities, making it the best embedded solution for new systems. MTBF: 1,800,000 Hours. Support APST, ASPM, L1.2 power management. Designed with no moving parts to help protect against data loss if it is accidentally bumped or dropped. And with several error correction technologies, Inland NVMe PEIe SSD can help guard data for years to come. Everyone at Inland is dedicated to providing the best service to our customers. We are devoted to your satisfaction on every product. So you can be confident of your storage when you upgrade or replace any of your drives in Micro Center store. See Technical Specification later on this product page for the Installation Manual including tech support information.It may be necessary to update the BIOS of your motherboard if this SSD cannot be recognized - please seek additional information from the motherboard manufacturer if needed.SSD performance may vary based on system hardware and configuration. Capacity: 1TB; Interface: PCIe Gen 3.0 x 4; Form Factor: M.2 2280; Architecture: 3D TLC NAND Flash; NVMe 1.3 Compatible PCIe 3.1 Compatible Support Windows: 8 &10

Related Products

Hot Sell Market,ready-to-ship (RTS) online retailer ,bulk & wholesale and ODM/OEM e-shop of Electronic Products © 2025