LF1-S-PIN 2-Pin Electronic LED Flasher Relay Fix Motorcycle LED Turn Signal Bulbs Hyper Flash by Ketofa
Availability: In Stock
About this product
*Part Number: LF1-S-PIN
*Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well
*Rated Voltage: 12VDC，24VDC.Completely waterproof design, Directly replace the OEM two-wire flasher.
*Eliminate the need for tapping wires to install the load resistors. Allow LED bulbs to blink at the normal rate.
*Note:LED flash will only fix the LED bulbs hyper flash issue, not the wattage lower than stock bulb related "bulb out" warning message on dashboard.
Description
Spec
Operating Voltage: 12V (11V-15V)
Max Power: 150W
Flashing Frequency: 90 Times/Min
Switch Power: 0.02A to 12A
Operating Temperature: -40°C to +80°C
LF1-S-PIN Work to replace most 2-pin flasher (if the wirings orders are different, you can always remove the white adapter to plug in the wires/pins directly)
1.Completely waterproof design and direct replace most OEM two-wire/pin flasher.
2.Eliminate the need for tapping wires to install the load resistors and allow LED bulbs to blink at the normal rate.
3.Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well.
4.2-Pin Electronic LED Flasher Relay Fix for Motorcycle LED Turn Signal Bulbs Hyper Flash HOW TO USE?The red line is (B) power source ten poles. The black line is the ten pole of the (L) connection lamp. Please note Not red connect positive, black connect negative.In this way, it will burn easily the flasher.
Related Products
