15ft Micro USB & Mini USB Dash Cam & Type-C Hardwire Kit w. Mini(ACS)/LP Mini(ACN)/ATO(ATC or ACU)/Micro2(ACZ) Fuse, Micro to Mini/USB-C Port Adapters & Battery Drain Protection (Mini)

Search "How To Hardwire A Car dash camera" in Youtube and check the instructional video from dial2fast to find out how it works. The NuCam Hardwire Fuse Kit with Micro USB Bundle has everything you need to charge your dash cam, cellphone, tablets or other devices from your car’s battery even if your engine is off. It has low voltage protection so that you can use to power your dash camera 24/7 without draining your battery to dead.If you’re worried about someone breaking into your car when it’s in the parking lot, you can use our NuCam DL and set it to parking mode so that it will be on and ready to record. The Dash Cam Hardwire Kit keeps your 12V outlet free, so you can keep your phone charged and power your dash camera at the same time. It also means that there’s less RF interference or static when you’re listening to the radio. You can play your favorite station without losing the signal.

What’s Included:

1 x MicroUSB Hard wire Kit
1 x Low-Profile Mini Fuse Holder
1 x Mini Blade Fuse Holder
1 x ATO (regular) Fuse Holder
1 x Micro2 Fuse Holder
1 x MicroUSB - Type C adapter
1 x Fuse Puller
1 x MicroUSB - MiniUSB adapter (left angled miniUSB. If you are looking for right angled miniUSB, please search B0787LD92N.)
* If your kit is missing any of the above adapters, contact Nuvending California office with your order # so that we can provide the correct adapter.
Features :
Hardwire kit for dash cameras that use micro USB/Mini USB
Works with NuCam DL, K1S, Zero Edge, DDpai, Goluk and more!
24 hour surveillance protects against battery dying with parking mode.
Keeps 12V cigarette outlet free
Does not alter original wiring. Easily installs on the existing circuit Install, looks clean and professional
Gives power to a number of electronic devices up to 5V/2A.
Extra length of hard wire allows you to connect to the fuse box under the hood: input length: 3ft, output length: 12ft

NuVending MiniUSB Hardwire Kit for Dashboard Cameras

As dash cams are becoming increasingly popular with motorists, a great hardwire kit that's easy to install is also in high demand. This is the one.

The kit is designed for ALL Dash Cams with miniUSB ports like NuCam AW, Vanture N2, G1w, Mini-0801, GT680w, Mobius Action Camera, K1S, Zero Edge, DDpai plus much more. It also comes with popular fuse types like Low-Profile Mini, Mini, ATO(Regular), and Micro2.

With an Input length of 3 ft. and an Output length of 12 ft., this hardwire kit stretches a total of 15 feet! The hardwire kit can be installed virtually on any vehicle with room to spare.

A pretty straightforward install without the hassle and confusion of too many wires and connections, results in a professional finish.

Comes with ACZ, ACS, ACN and ACU fuse adapters for you to use whatever your vehicles computer box requires

NUNET hardwire kit can be applied to almost all cars (voltage between 12-24V, 4 fuse adapters included) and almost all devices with micro USB or mini USB port(such as NuCam dash cam, GPS, radar detector, Uber/Lyft sign, phones etc).

The hardwire kit is "wired" to power off your device when the vehicles battery voltage drops to 11~11.6V to save you power needed to start your engine. The kit is also suitable for a 24V system.

Search "How To Hardwire A Car dash camera" in Youtube and check the instructional video from dial2fast to find out how it works. The NuCam Hardwire Fuse Kit with Micro USB Bundle has everything you need to charge your dash cam, cellphone, tablets or other devices from your car’s battery even if your engine is off. It has low voltage protection so that you can use to power your dash camera 24/7 without draining your battery to dead.If you’re worried about someone breaking into your car when it’s in the parking lot, you can use our NuCam DL and set it to parking mode so that it will be on and ready to record. The Dash Cam Hardwire Kit keeps your 12V outlet free, so you can keep your phone charged and power your dash camera at the same time. It also means that there’s less RF interference or static when you’re listening to the radio. You can play your favorite station without losing the signal.

What’s Included:

1 x MicroUSB Hard wire Kit
1 x Low-Profile Mini Fuse Holder
1 x Mini Blade Fuse Holder
1 x ATO (regular) Fuse Holder
1 x Micro2 Fuse Holder
1 x MicroUSB - Type C adapter
1 x Fuse Puller
1 x MicroUSB - MiniUSB adapter (left angled miniUSB. If you are looking for right angled miniUSB, please search B0787LD92N.)
* If your kit is missing any of the above adapters, contact Nuvending California office with your order # so that we can provide the correct adapter.
Features :
Hardwire kit for dash cameras that use micro USB/Mini USB
Works with NuCam DL, K1S, Zero Edge, DDpai, Goluk and more!
24 hour surveillance protects against battery dying with parking mode.
Keeps 12V cigarette outlet free
Does not alter original wiring. Easily installs on the existing circuit Install, looks clean and professional
Gives power to a number of electronic devices up to 5V/2A.
Extra length of hard wire allows you to connect to the fuse box under the hood: input length: 3ft, output length: 12ft