EASYGUARD EC110 RFID car Alarm kit with Push Start Stop Button with Remote Engine Start for Automatic Cars Optional DC12V

Dear Customer,
This is a RFID push start button kit with transponder Immobilizer, remote engine start (only optional for automatic cars usage) stop & power on ACC/ON.
Important:
We do not provide installation service.
Professional car alarm installer installation is required. English User manual & Wiring diagram is available for reviewing upon request.
There is no remote or key fobs in this kit as this device need to work with your existed remote or aftermarket remote.
An extra bypass module (like ASIN: B07NSLPBG7 or B00MEHBVIC) is required If there is a chip immobilizer in your car factory OEM key fob (remote)
The item fits for 95% DC12V cars on the market, including both diesel and petrol cars, manual gear or automatic gear cars.
If your car is diesel car with engine starting/cranking time more than 3 seconds, please add an extra timer delay switch.
You need to unlock/release/remove the steering lock while installing this item.
Main features
1. Arm: Turn ACC off and the car is shut off, the system will enter arming mode after 15 seconds automatically.
2. Disarm: In arming mode, put the responder gets close to (1-2 inches) the wire circle to disarm the device
3. Shift among ACC-ON-OFF
4. Push button start/stop
5. Remote engine start/stop (optional, see note as below)
Important note:
1.The remote engine start function can work with automatic gear cars only
2.When use remote engine start function, the gear selector must be in Neutral position.
3.To use remote engine start function, every time when press lock button once, there should once lock signal form the transmitter (key fob). That's to say, there should be 3 times lock signal when you continue to press lock button on key fobs 3 times. If not, unable to use remote engine start function.
6. RFID induction card study
7. Car status memory
8. Lost or stolen keys can be coded out